该词条未找到_海词词典

您要查找的是不是：

Keywords Deep drawing LDR BHF control; 拉深;极限拉伸系数;压边力控制;
Keywords deep drawing;earing;FEM;CMTP yield function; 关键词深冲;制耳;有限元模拟;CMTP屈服函数;3104铝合金;
Keywords deep drawing;side wall wrinkling;critical BHF; 拉深成形;侧壁起皱;临界压边力;
Keywords deep drawing lubricator;comprehensive assessment;sonde procedure;maximum drawing force;limiting drawing ratio; 拉深润滑剂;综合评定;探针法;最大拉深力;极限拉深比;
Keywords deep drawing;blank design;flange;potential function;refluent and layerbuilt unfolding; 拉深;板坯设计;凸缘;势函数;逆向逐层展开;
Keywords deep drawing forming;identification of parameters;neural network;intellectualization; 拉深成形;参数识别;神经网络;智能化;
Containers, lids and deep drawing injection moldings. 容器、盖子和深拔注塑。
Deep drawing stcel for auto headtamp fuel tank, car door and windows. 汽车前车灯、油箱、轿车门、窗等深冲压成形加上用钢。
An analytical model is established for axisymmetric parts in deep drawing. 摘要建立了轴对称件拉深侧壁起皱的数学模型。
The deformation of cone-box shaped part in hydromechanical deep drawing is simulated by the FEM software ANSYS. 摘要利用大型有限元分析软件ANSYS对锥盒形件充液拉深的成形过程进行了数值模拟。
The 3D simulation model of box deep drawing was presented and validated with the homologous experiment. 摘要建立了矩形盒拉深成形的三维仿真分析模型，并将其与实验结果进行了对比验证。
Abstract: Blank holder structure and blank holder force （BHF） are very important to the part quality in deep drawing. 摘要: 压边结构及压边力对板料拉深成形质量有着重要影响。
They are deeply drawn by God and they adore Him. 常被神的作为深深吸引并爱慕神。
Kawai N.Critical conditions of wrinkling in deep drawing of sheet metals. JSME. 1961. 梁炳文.;胡世光
The finite-element code ANSYS/LS-DYNA was used to simulate the process of rectangular box deep drawing. 利用有限元软件ANSYS/LS-DYNA研究变压边力对矩形件拉深成形性能的影响。
Deep drawing experiments were carried out for tailor\|welded blank square boxes. 本文对拼焊板方盒件的拉深成形进行了试验研究。
A new method has been used to simulate the actual blank holding process in deep drawing of a washing trough. 采用新的研究方法模拟水槽拉伸的实际压边过程。
The finite element model of hydro-mechanical deep drawing is established based on the commercial software DYNAFORM-PC. 采用商用有限元软件DYNAFORM-PC，建立了筒形件液压-机械拉深过程数值模拟模型。
It is analyzed the controlling-sulfur technique in smelting of SPHD deep drawing steel. 对唐山建龙实业有限公司SPHD深冲钢冶炼过程中的控硫技术进行了分析。
Light-vehicle headlamp reflector is constituted of parabolas to3-D surface,which is a deep drawing workpiece. 轻型车前照灯反光镜是由抛物曲线构成的三维曲面深拉深件。